ICPDAS DL-100-E User Manual page 10

LED Indicators
The three LED indicators from left to right are:
PWR: green for normal operation.
Link: green for the Ethernet linked.
PoE: red for powered via PoE
DIP Switch
PoE/non-PoE Ethernet port
The Ethernet port can be used to connect to either a PoE switch or a non-PoE switch.
Installing a waterproof attachment on an RJ45 connector.
The DL-100-E series module is equipped with an RJ-45 waterproof connector that
ensures the device is able to withstand potential contaminants in dusty environments.
IP67 RJ45 Plug (4SASO-0001)
DL-100-E / DL-101-E / DL-110-E / DL-120-E User Manual
The functions are printed on the top beside the
SW1 DIP switch. All the 4 dip switches need be
turned to the off position for normal operation.
1. Reserved
2. FW Update: ON for updating firmware.
3. Reserved
4. INIT: ON for using the factory default settings
for communication
Version 1.1.3 Dec 2020 - 10 -