Integration Box Height Adjustable Table (Hat) - tayco Halifax Installation Manual

Integration Box Height Adjustable Table (HAT)

1.
Ensure the installation area is
covered for surface protection.
2.
Level/align the HAT integration
box from front to back and side to
side by rotating the adjustable
glide counterclockwise to extend
the glide and raise the storage
unit, (Figure 1).
Note: The storage unit should be
precisely level before joining
another storage unit.
3.
Use the right-angle drill adapter to
join the HAT integration box to
the adjoining storage unit per the
configuration. Use #10 x 3/4" long
Pan Head Screws, (Figure 2).
Continued on the next page >>
STORAGE UNIT 1
HAT INTEGRATION BOX
#10 X 3/4" PAN HEAD SCREW
May 2023
Right Angle Drill Philips Bit
8540-1013
Torpedo Level #10-3/4" Pan Head
Screw
Figure 1
Figure 2
Tools & Hardware Needed
halifax 28