tayco Halifax Installation Manual page 30

Integration Box Height Adjustable Table (HAT)
7.
Place the surface face down on
a clean solid surface or floor.
8.
Install the HAT skirt to the
surface, please see how to
install the HAT skirt.
9.
Prepare and install the HAT
table mechanism to the
surface. Use HAT table install
instructions which come in the
HAT mechanism box.
10.
Depending on the desk
configuration LH or RH, install
the leg mounting plate instead
of the foot provided in the
box. Use the screws and glides
that are provided in the box to
install the foot for the leg
mounting plate.
Foot hardware is compatible
with leg mounting plate,
(Figure 6).
11.
Install the E-chain carrier
assembly bracket to the
surface. Use 2 each #8 x 5/8"
Flat Head Screws, (Figure 7).
Continued on the next page >>
SURFACE
HAT LEG
HAT LEG MOUNTING PLATE
#10-M6 X M16 BOLT SCREW
E-CHAIN CARRIER ASSEMBLY BRACKET
#8 X 5/8" FLAT HEAD SCREW, QUADREX
LEVELING GLIDE
May 2023
Drill Robertson # 2
8540-0605
Phillips Bit #8 x 5/8", Flat Head
Screw
RH TABLE
CONFIGURATION SHOWN
Figure 6
Figure 7
Tools & Hardware Needed
halifax 30