tayco Halifax Installation Manual page 15

Low Credenza Mounted Desk, A-Leg
Lay down wires/cables
Note:
before installing the surface.
Fish wires and cables through
10.
desk support box, (Figure 9).
Position desk so it rests on
11.
the desk support box; level
the desk by adjusting the
glides.
12. Attach the worksurface to
desk support metal using the
#8 x 5/8, Pan Quadrex drive
Screw, (Figure 10).
Fish wires and cables through
13.
hole of the table support
beam; lay-in the wires and
cables and fish them through
the grommet hole.
Continued on the next page >>
TABLE SUPPORT BEAM
4
#8 x 5/8" PAN QUADREX DRIVE SCREW
7
DESK SUPPORT BOX
1 1
LOW CREDENZA STORAGE
1 4
WIRES/CABLES
1 5
May 2023
7
11
Drill Robertson # 2
1 5
1 1
1 5
4
7
1 1
Tape Measure Torpedo Level
1 4
Figure 9
1 4
Figure 10
Tools & Hardware Needed
8540-0528
#8 x 5/8" Pan Head
Screw
halifax 15