A-Leg Cover With Wire/Cable Pass Through - tayco Halifax Installation Manual

A-Leg Cover with Wire/Cable Pass Through

For A-leg cover without
wire/cable pass through,
skip STEP 1.
Fish wires and cables
1.
through holes of the table
support beam or grommet
hole: lay-in the wires and
cables, (Figure 1).
Insert the A-leg guide into
2.
the slotted hole of A-leg
cover, (Figure 2).
Continued on the next page >>
1
2
3
4
May 2023
TABLE SUPPORT BEAM
A-LEG
A-LEG COVER
A-LEG GUIDE
1
4
3
3
Tools & Hardware Needed
2
Figure 1
2
2
4
Figure 2
halifax 23