tayco Halifax Installation Manual page 29

Integration Box Height Adjustable Table (HAT)
4.
Install legs and mending
plates on the side end box
depending on the left or right
configuration, (Figure 3).
5.
Level/align the end box from
front to back and side to side
by rotating the adjustable
glide counterclockwise to
extend the glide and raise the
end box, (Figure 4).
Note: The storage unit should
be precisely level before
joining another storage unit.
6.
Join the side end box to the
adjoining storage unit per the
configuration by using the
right-angle drill adapter. Use
#10 x 11/16" long Oval Head
Screws, (Figure 5).
Continued on the next page >>
May 2023
HAT INTEGRATION BOX
5/8 X 1-3/4" MENDING PLATE
#10 X 11/16" OVAL HEAD, SQ DRIVE
SIDE END BOX
Right Angle Drill Robertson # 2
MENDPLATE-BLK
Torpedo Level 5/8 X 1-3/4"
Mending Plate
Figure 3
Figure 4
Figure 5
Tools & Hardware Needed
8540-0545
#10 x 11/16", Oval
Head Screw
halifax 29