tayco Halifax Installation Manual page 21

Low Credenza Mounted Desk, A-Leg w/ Short Gable
Lay down wires/cables
Note:
before installing the surface.
Fish wires and cables through
11.
desk support metal box,
(Figure 10).
Position desk so it rests on
12.
the desk support box; level
the desk by adjusting the
glides.
NOTE: Make sure the outer
corner of short gable and
back corner of low credenza
are flush
Secure the desk by attaching
13.
the mending plates with
provided #10 x 11/16, Oval
Head Screws, (Figure 11).
Continued on the next page >>
1 4
1 5
1 6
May 2023
LOW CREDENZA STORAGE
1 1
DESK SUPPORT BOX
1 3
WIRES/CABLES
MENDING PLATE
#10 X 11/16" OVAL HEAD SCREW
Drill Robertson # 2
1 4
1 3
3.00 "
1 6
15
16
Tape Measure Torpedo Level
1 1
1 4
1 5
Tools & Hardware Needed
8540-0545
#10 x 11/16", Oval
Head Screw
Figure 10
Figure 11
MENDPLATE-BLK
Mending Plate
halifax 21