2. Unpack products in the general order of installation (refer to Installation Sequence). WASTE MANAGEMENT 1. Establish a trash removal area separate from the product staging area. OCTOBER 2019 metro 1...
Painted Metals Tayco’s painted metal products are powder-paint-coated. To clean these products, use a damp cloth, using only a small amount of lukewarm water if necessary. Dry with a clean a dry cloth. To avoid scratching and damaging the painted surface, do not use hard bristled brushes or abrasive.
Place the laminate end gables in the waste bin and the screws in the recycle bin containing steel materials. Continued on the next page >> Figure 2 tools & hardware needed Drill Robertson # 2 OCTOBER 2019 metro 81...
Page 85
. Place Figure 3 the 90° steel brackets and screws in the recycle bin containing steel materials. 10. Place the laminate modesty the waste bin. Figure 4 tools & hardware needed Drill Robertson # 2 OCTOBER 2019 metro 82...
Need help?
Do you have a question about the Metro and is the answer not in the manual?
Questions and answers