Table of Contents
Advertisement
Metal Storage, for Under Hutch
Align the edges of metal
1.
storage 1 with the edges of
bottom laminate of the
overhead storage. Make
sure the edges of the metal
storage and edges of bottom
laminate of the overhead
storage are flush, (Figure 1).
Attach the Metal Storage in
2.
the underside of Overhead
Storage/Hutch using (5) #10
x 11/16" Oval Head Screws.
Align the edges of the metal
3.
storage 2 with the edge of
the metal storage 1 and the
front edge of bottom
laminate of the overhead
storage.
Repeat Step 2.
4.
METAL STORAGE 1
1
METAL STORAGE 2
2
#10 x 11/16" OVAL HEAD SCREW
3
OVERHEAD STORAGE/HUTCH
4
May 2023
Drill
Robertson # 2
Flush edge of metal storage
with the edge of the laminate
4
3
Flush edge of metal storage
with the edge of the laminate
and metal storage
2
3
Tape Measure
#10 X 11/16" Oval
Head Screw (5X)
3
1
1
Figure 1
4
1
3
2
Figure 2
Tools & Hardware Needed
8540-0545
halifax 48
Advertisement
Table of Contents
