Integration Box Height Adjustable Table (HAT)
Ensure the install area is
1.
covered for surface protection.
Level/align the HAT integration
2.
box from front to back and side
to side by rotating the
adjustable glide
counterclockwise to extend the
glide and raise the storage unit,
(Figure 1).
Note: The storage unit should
be precisely level prior to
joining other storage unit.
Join the HAT integration box to
3.
the adjoining storage unit per
the configuration by using right
angle drill adapter. Use #10 x
3/4" long Pan Head Screws,
(Figure 2).
Continued on the next page >>
STORAGE UNIT 1
1
HAT INTEGRATION BOX
2
#10 X 3/4" PAN HEAD SCREW
3
January 2021
Right Angle Drill
Philips Bit
8540-1013
Torpedo Level
#10-3/4" Pan Head
Screw
Halifax
1
2
3
2
3
Tools & Hardware Needed
Figure 1
Figure 2
Page 24