Advertisement
Step 3:
Press the end of the card far from the socket down while making sure the retention notch and
the clip align as indicated by the dotted line in the illustration. If the retention notch and the clip
do not align, please remove the card and re-insert it. Press the card all the way down.
Step 3
Step 4:
The clips snap automatically and abruptly to the retention notches of the card sounding a
distinctive click, and lock the card in place. Inspect that the clip sits in the notch. If not, please
pull the clips outward, release and remove the card, and mount it again.
Step 4
Quick Installation Guide | EC70A-TGU
6
Advertisement
