Ups Setting - Delta Amplon Series User Manual

3.5 UPS Setting

There are three parameters to set up the UPS.
Parameter 1: It is for function selection. Refer to the table below.
Parameter 2 and Parameter 3 are the setting options or values for each
program.
01: Output voltage setting
Parameter 3: Output voltage
You may choose the following output voltage:
200: presents output voltage is 200Vac
208: presents output voltage is 208Vac
220: presents output voltage is 220Vac
230: presents output voltage is 230Vac (Default)
240: presents output voltage is 240Vac
Parameter 1
Parameter 2 Parameter 3
1 6
Chapter 3 Operation