02: Frequency converter enable/ disable
Parameter 2 & 3: Enable or disable converter mode. You may choose the
following two options.
CF ENA: converter mode enable
CF DIS: converter mode disable (Default)
03: Output frequency setting
Parameter 2 & 3: Output frequency setting.
If the battery mode is enabled, you may choose the following initial
frequency.
BAT 50: presents output frequency 50Hz
BAT 60: presents output frequency 60Hz
If the converter mode is enabled, you may choose the following output
frequency.
CF 50: presents output frequency 50Hz
CF 60: presents output frequency 60Hz
Amplon N Gen3 Series
17