Fnirsi FNB48P Manual page 20

11.Setting menu
【 11.0.1 】 General
Set up some general system configurations.
●Display brightness： Set the screen brightness, the adjustable range is 1-20.
●Standby brightness： Set the standby screen brightness,adjustable range 0-20 level,
when set to 0,enter the standby state and turn off the screen directly.
●Standby time： Set the standby time, the last time you operate the button to start
timing,reach the standby time,enter the standby state.
●Data transmission： After closing, you cannot connect to the computer through the
PC port.
●Temperature symbol： The onboard temperature can be displayed as °C/℉.
●Language： Currently only Chinese/English is supported. Due to the character size
problem, English will be displayed in the Chinese system, which is a normal
phenomenon.
●Current change wake up： Set the wake-up current,When the current change
exceeds the wake-up current,the meter changes from standby state to normal
working state.When set to 0, this function is turned off.
●Bluetooth switch： After closing, bluetooth data transmission is not possible.
●Gravity direction recognition： When opened,automatically switch page orientation,
After closing, unable to automatically switch the page reverse,but you can switch
the page direction by long pressing the middle button on the (7.0.1) simple page.
●Boot page： Turn on/off the boot page.
●Reset： Restore all settings except the recorded data.
●In the settings menu,left click and right click to select
menu options,click the middle button to enter/con-
firm the current option,click the BACK button to
return / cancel / exit the current option / menu.
16