Qc3.0 Trigger; Huawei Fcp Trigger; Huawei Scp Trigger; Samsung Afc Trigger - Fnirsi FNB48P Manual

【 9.0.3 】 QC3.0 Trigger
【 9.0.4 】 Huawei FCP trigger
The operation method is the same as QC2.0 trigger.
【 9.0.5 】 Huawei SCP trigger
The operation mode is the same as QC3.0 triggert
【 9.0.6 】 Samsung AFC trigger
The operation method is the same as QC2.0 trigger.
【 9.0.7 】 PD Protocol trigger
5.249 86V
●When the left dot stays on Gear,the gear can be switched by the left and right keys.
226
0.755 26A
When the gear is switched to PPS gear,then you can switch the step voltage by
clicking the middle button,after selecting the step voltage,through the left and right
keys (left minus right plus),decrease/increase voltage.
●In QC3.0 trigger mode,Use the left and right keys
to decrease/increase the trigger voltage,click
BACK to return.
●Press the left/right keys to quickly decrease/in-
crease the voltage.
●Switch the PD communication switch to ON, enter
the PD protocol trigger mode.After exiting the PD
trigger, switch the PD communication switch to OFF.
●Take the picture as an example. The picture shows a
message sent by a charger.There are 6 gears in total,
of which gears 1, 2, 3, 4, and 5 are fixed voltage
gears.The sixth gear is the adjustable voltage gear
(PPS).
mΩ
11