Fnirsi FNAC-28 Manual

Multi-port usb tester

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

FNAC-28

多接口USB 检测仪

Multi-port USB tester Manual

Table of Contents

Need help?

Do you have a question about the FNAC-28 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fnirsi FNAC-28

Page 1 FNAC-28 多接口USB 检测仪 Multi-port USB tester Manual...
Page 3 目录...
Page 4 CATALOG...
Page 5 用户须知 ●本手册详细介绍了产品的使用方法和注意事项，请仔细阅读本手册按说明规范使用本产品，以便发挥产品的最佳性能。 ●不要在易燃、易爆的环境中使用仪器。 ●仪器更换的废旧电池和报废的仪器不可与生活垃圾一同处理，请按国家或者当地的相关法律规定处理。 ●当仪器出现任何质量问题或者对使用仪器有疑问时，可联系 “菲尼瑞斯-FNIRSI” 在线客服或厂家，我们将在第一时间为您解决。一、产品概述 FNAC-28USB测试仪是一款多功能接口的USB 电压电流检测表及移动通信终端快充触发仪。具有全彩超宽视角TFT LCD显示屏及集成USB-A、 Type-C公母多接口，适配广。使用外置16位ADC 芯片，测量精度高。可用于测量USB接口、手机充电器、 U盘等产品的供电或耗电情况；可用于测量手机充电功率、移动电源输入输出状况；可用于充电器快充协议测试。...
Page 6 二、面板介绍输入监控口屏幕输入监控口 Type-C Type-C供电口按键区域输出监控口输出监控口 Type-C USB-A...
Page 7 三、参数介绍量程分辨率精度款式 FNAC-28 屏幕 1.06寸监控电压 4~24V 0.001V ±(0.2‰+2) 监控电流 0~6.5A 0.001A ±(0.2‰+2) 监控功率 0~156W 0.001W ±(0.2‰+2) 1℃ ℃ ±(1.2%+3) 设备温度 ℉ 1℉ ±(1.2%+4) 运行时间 1秒尺寸 73×36×12mm 重量...
Page 8 四、主界面 ●除特殊说明，单击 < / > 切换页面/菜单，单击 OK 确认/唤出功能菜单，长按 OK 返回到上一级界面。【 4.1 】简洁页面 ●只显示电压、电流、功 0.0000 率三个关键参数 0.0000 ●单击OK键切换显示 0.0000 方向【 4.2 】检测页面 ●长按 < 键或者 > 键进行切换下一组计时组时间 ●长按 OK 键清空当前计时组时间...
Page 9: Qc2.0
【 4.4 】应用页面 ●快充应用 01 快充 ●工具箱 02 工具箱 ●设置 03 设置 ●设备运行时间运行 001:00:00 五、快充应用在应用界面按OK进入选择快充应用，进入快充应用时会弹出一个警告，请仔细阅读按OK确认进入。进入后通过 < / > 键选择选项功能如下： ①自动检测 ⑥AFC 9V 12V ②QC2.0 5V 9V 12V 20V ⑦VOOC/WARP ③QC3.0 3.4-20V ⑧SVOOC 1.0 ④FCP 9V 12V 20V ⑨SVOOC 2.0...
Page 10: D+ 1.500 V D
●在测试过程中，禁止在后端接入任何设备。 ●检测期间不响应任何按键操作，若想在检测期间退出，请直接拔掉仪表。 ●检测完成后，短按OK键，可再次启动检测；长按 OK键，返回上一页面。【 5.2 】 QC2.0检测页面在快充页面选择QC2.0 0.100 按 OK 键进入 QC2.0 0.000 ●QC2.0触发模式下，通等待 0.000 过 < / > 键选择触发电 1.500 V 压 1.500 ●长按 OK 键返回上一页面【...
Page 11 【 5.4 】 FCP触发操作方式与QC2.0触发相同【 5.5 】 SCP触发操作方式与QC3.0触发相同【 5.6 】 AFC触发操作方式与QC2.0触发相同【 5.7 】 VOOC/WARP触发操作方式与QC3.0触发相同【 5.8 】 SVOOC 1.0/SVOOC 2.0触发 Super VOOC需要后端接大于500mA的负载进行诱骗，且Super VOOC仅有10.5V一档电压，因此进入页面只能按 OK 键退出，并无其他操作六、工具箱在应用选择页面下选择工具箱按 OK 键进入，功能选项如下，...
Page 12 0.144 单击OK键：将当前电压 0.000 0.000 电流值作为参考值测量步骤: 1.连接方式：充电器+FNAC-28+恒流负载(电流调到0.5-1A左右)，按OK键记录参考值 2.连接方式：充电器 + 线缆 + FNAC-28 + 恒流负载 (电流调到0.5-1A左右，需跟记录参考值时的电流相近)，系统自动计算线缆内阻【6.2 】模拟APPLE 2.4A 苹果设备在检测到充模拟APPLE 2.4A 电头D+及D-为2.7V的时候才能以5V-2.4A充...
Page 13 七、设置在应用选择页面下选择设置按 OK 键进入，功能选项如下，按 OK 键进入各个功能选项 ①系统设置设置 01 系统设置 ②恢复出厂设置 02 恢复出厂设置 ③关于 03 关于【 7.1 】系统设置在设置页面中选择二级菜单系统设置，按 OK 键进入系统设置系统设置 01 显示亮度 02 待机亮度 02 待机亮度 03 待机时间(分钟) 03 待机时间(分钟) 04 温度符号...
Page 14 【 7.2 】系统重置所有数据，恢复到出厂状态【 7.3 】关于查看制造商/型号/软件版本等信息八、固件升级 ●打开上位机软件 ●仪表处于关机状态时，按紧中键，使用带有数据传输的数据线接入PC联机端口，电脑端显示上位机软件主页面即为连接成功。 ●点击系统--点击文件夹--选择固件。 ●点击升级符号,开始升级固件。升级完成后，仪表将自动重启并进入主界面...
Page 15 九、注意事项 ●监控接口请勿接入超过24V的电源 ●PC联机端口请勿接入超过16V的电源 ●同一时间只能有一对监控接口(一个输入口、一个输出口)工作，当已有一对监控接口工作时，禁止在其他监控接口接入设备。 (PC联机端口除外， PC端口可接外置电源) ●在使用快充触发模块时，请勿在任何监控接口接入不能承受高压的设备 ●请勿在快充触发后给手机充电，因此造成手机损坏，厂商概不承担。十、生产信息产品名称：多接口USB检测仪品牌/型号： FNIRSI / FNAC-28 服务电话： 0755-28020752 生产商：深圳市菲尼瑞斯科技有限公司网址： www.fnirsi.cn 地址：广东省深圳市龙华区大浪街道伟达工业园C 栋西边8楼执行标准： GB/T12116-2012...
Page 16: Product Overview
"FNIRSI" online customer service or the manufacturer. We will assist you as soon as possible. 1.Product Overview The FNAC-28 USB Tester is a multifunctional USB voltage and current meter, as well as a quick charge trigger device for mobile communication terminals.
Page 17: Panel Introduction
including USB-A and Type-C male and female connectors, ensuring broad compatibility. Utilizing an external 16-bit ADC chip, it oﬀers high measurement accuracy. This device can measure the power supply or consumption of USB interfaces, phone chargers, USB drives, and other products. It can also measure phone charging power, and the input and output conditions of power banks, and perform quick charge protocol testing for chargers.
Page 18 Type-C Button Area Power Port Output Monitoring Port USB-A Output Monitoring Port Type-C...
Page 19: Parameter Description
3.Parameter Description Resolution Accuracy Range FNAC-28 Model 1.06inch Screen Monitored 0.001V ±(0.2‰+2) 4~24V Voltage Monitored 0.001A ±(0.2‰+2) 0~6.5A Current Monitored 0.001W ±(0.2‰+2) 0~156W Power 1℃ ±(1.2%+3) ℃ Device Temperature 1℉ ±(1.2%+4) ℉ Operating Time 73×36 Dimensions ×12mm Weight...
Page 20: Main Interface
4.Main Interface ●Unless otherwise speciﬁed, click < / > to switch pages/menus, click OK to conﬁrm/- summon the function menu, and long press OK to return to the previous interface. 【 4.1 】 Simpliﬁed Page ●Only displays the 0.0000 three key 0.0000 parameters:voltage, current, and power.
Page 21 【 4.3 】 Waveform Page ●Long press the < button to decrease the time base. ●Long press the > button to increase the time base. ●Click the OK button to start/pause the curve. ●Long press the OK button to switch waveform modes.
Page 22: In The Quick Charge
After entering, use the < / > buttons to select options with the following functions: ①Automatic Detection ⑥AFC 9V 12V ②QC2.0 5V 9V 12V 20V ⑦VOOC/WARP ③QC3.0 3.4-20V ⑧SVOOC 1.0 ④FCP 9V 12V 20V ⑨SVOOC 2.0 ⑤SCP 5.5-6.0V 【 5.1 】 Automatic Detection In the Quick Charge Finish Detection...
Page 23: Table Of Contents
●After detection is complete, short press the OK button to start detection again; long press the OK button to return to the previous page. 【 5.2 】 QC2.0 Detection Page In the Quick Charge 0.100 QC2.0 page, select QC2.0 0.000 Wait and press the OK 0.000...
Page 24 【 5.4 】 FCP Trigger The operation is the same as QC2.0 trigger. 【 5.5 】 SCP Trigger The operation is the same as QC3.0 trigger. 【 5.6 】 AFC Trigger The operation is the same as QC2.0 trigger. 【 5.7 】 VOOC/WARP Trigger The operation is the same as QC3.0 trigger.
Page 25 Click the OK button: Use the current voltage and current values as reference values. Measurement Steps: 1.Connection Method: Charger + FNAC-28 + Constant Current Load (adjust current to around 0.5-1A), press OK button to record reference value. 2.Connection Method: Charger + Cable + FNAC-28 + Constant Current Load (adjust current to around 0.5-1A, close to the current...
Page 26 【6.2 】 Soft APPLE 2.4A Apple devices can Soft APPLE 2.4A only charge at 5V-2.4A when detecting D+ and D- of the charger as 2.7V. After activation, this function sets D+ and D- to 2.7V. 7.Settings In the application selection page, select Settings and press the OK button to enter.
Page 27 【 7.1 】 System Settings In the Settings page, select the sub-menu "System Settings" and press the OK button to enter. System Settings System Settings 01 Display bright 02 Standby bright 02 Standby bright 03 Standby time(min) 03 Standby time(min) 04 Temperture symbol 04 Temperture symbol 05 System language...
Page 28: Firmware Upgrade
【 7.2 】 System Reset Reset all data and restore to factory settings. 【 7.3 】 About View manufacturer/model/software version, etc. information. 8.Firmware Upgrade ●Open the host software. ●When the device is powered oﬀ, press the middle key ﬁrmly, and connect it to the PC's online port using a data cable.
Page 29 9.Precautions ●Do not connect a power source exceeding 24V to the monitoring interface. ●Do not connect a power source exceeding 16V to the PC online port. ●Only one pair of monitoring interfaces (one input port, one output port) can work at a time.
Page 30: Production Information
10.Production Information Any FNIRSI's users with any questions who comes to contact us will have our promise to get a satisfactory solution +an extra 6 months warranty to thanks for your support! By the way, we have created an interest- ing community, welcome to contact FNIRSI staﬀ...

Fnirsi FNAC-28 Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fnirsi FNAC-28

Summary of Contents for Fnirsi FNAC-28

Table of Contents