4-6.12 Save & Exit Setup; 4-6.13 Exit Without Saving - SOLTEK SL-K890-754G Manual

SL-K890-754G
2. The first time you run this option, enter your password up to 8 char-
acters and press <Enter>. (The screen does not display the entered
characters.)
3. After you enter the password, the following message appears prompt-
ing you to confirm the password:
4. Enter the same password "exactly" the same as you have just typed
to confirm the password and press <Enter>.
5. Move the cursor to Save & Exit Setup to save the password.
6. If you need to delete the password entered before, choose the Su-
pervisor Password and press <Enter>. It will delete the password
that you have entered before.
7. Move the cursor to Save & Exit Setup to save the option you have
just configured; otherwise the old password will still be there the next
time you turn your system on.
8. Press <Enter> to exit to the Main Menu.
4-6.12 Save & Exit Setup
SAVE & EXIT SETUP allows you to save all modifications you have
specified into the CMOS memory. Highlight this option on the Main Menu
and the following message appears:
"SAVE to CMOS and EXIT (Y/N) ?
"Y" is for "Yes", and "N" is for "No".
Press <Enter> key to save the configuration changes.

4-6.13 Exit Without Saving

EXIT WITHOUT SAVING option allows you to exit the Setup Utility
without saving the modifications that you have specified. Highlight this
option on the Main Menu and the following message appears:
"Quit Without Saving (Y/N) ?
"Y" is for "Yes", and "N" is for "No".
You may change the prompt to "Y" and press <Enter> key to leave this
option .
"Confirm Password :
72
"
Y "
N "