Table of Contents
Advertisement
SL-K890-754G
Onboard Serial
Port 1 / Port 2
UART Mode Select The serial port on your system may offer a vari-
x UR2 Duplex Mode This options controls the operating mode between
Onboard Parallel Port This item allows you to determine onboard parallel
Parallel Port Mode Select an operating mode for the on-board parallel
x ECP mode Use DMA Select a DMA channel for the port when you choose
4-6.6 Power Management Setup
Choose "Power Management Setup" from the Main Menu and a list of
options will appear:
ACPI function
ACPI Suspend Type
Power Management Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
MODEM Use IRQ
Soft-off by PWRBTN
Run VGABIOS if S3 Resume
AC Loss Auto Restart
AMD K8 Cool'n'Quiet control
IRQ/Event Activity Detect
: Move Enter: Select
F5: Previous Values
Select an address and corresponding interrupt
for the first/second serial port.
Choices: Disabled; Auto;
3F8/IRQ4; 2F8/IRQ3;
3E8/IRQ4; 2E8/IRQ3
ety of infrared port modes. Click here for a de-
scription of various modes.
The choices: Normal; IrDA; ASKIR; SCR
receiving and transmitting of IrDA or ASKIR or SCR.
Choices: Half (asynchronous); Full (synchronous)
port controller I/O address setting.
Choices: 378H/IRQ7; 278H/IRQ5; 3BC/
IRQ7; Disabled
(printer) port.
Choices: SPP; EPP; ECP; ECP+EPP
ECP or ECP+EPP mode for the Parallel Port Mode.
Choices: 1; 3
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S1(POS)
User Define
Disabled
Disabled
Suspend -> Off
V/H SYNC+Blank
3
Instant-off
Auto
Off
Auto
Press Enter
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
64
Item Help
Esc: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
