SOLTEK SL-K890-754G Manual page 63

SL-K890-754G
IRQ/Event Activity Detect:
To press< Enter > on IRQ/Event Activity Detect will reveal following
items.
PS2KB Wakeup Select To select the PS/2 KB Wake-up mode.
PS2KB/Ms Wakeup
from S3/S4/S5
x Power Button Lock If the above item is not "Disabled", this item can be
PS2Ms Wakeup from
S3/S4/S5
(Optional)USB Resume
from S3
LPT & COM To enable/disable LPT & COM Wakeup function.
HDD & FDD To enable/disable HDD & FDD Wakeup function.
PCI Master To enable/disable PCI Master Wakeup function.
Power On by PCI Card To enable / disable(default) the Power On by PCI
Wake Up On LAN/Ring To enable / disable the wake on ring signal function.
RTC Alarm Resume
x Date (of Month)
x Resume Time (Hour /
Minute / Second)
IRQs Activity Monitoring:
To press< Enter > on IRQs Activity Monitoring will reveal following items.
Primary Intr. To turn on/off the Interrupt configuration.
IRQ3,4,5,6,7,9,10,11,12,
13,14,15
Choices: Hot key; Password
To set the hot key to wake up the system by PS/2
KB/Ms from S3/S4/S5.
Choices: Disabled; Power; Wake; Any Key;
Ctrl-F1~12
set enabled/disabled.
This item allows you to enable / disable the PS/2
Mouse Wake-up from S3/S4/S5.
To enable/disable USB Resume from S3
VGA To enable/disable VGA Wakeup function.
Card.
An input signal on the serial Ring Indicator (RI) Line
(in other words, an incoming call on the modem)
awakens the system from a soft off state.
To enable / disable the RTC Alarm Resume
function.
If RTC Alarm Resume is enabled, this field allows
you to set the Alarm Date, Hour, Minute and
Second.
Date Choices: 01 ~ 31; Hour : 00 ~ 23
Minute Choices: 00 ~ 59; Second: 00 ~ 59
To enable/disable IRQ Assignment.
66