Table of Contents
Advertisement
SL-K890-754G
Boot Up NumLock
Status
Typematic Rate Setting When Disabled, the following two items (Typematic
X Typematic Rate
(Chars / Sec)
X Typematic Delay
(Msec)
Security Option If you have set a password, select whether the
APIC Mode To enable / disable the APIC mode.
OS Select For DRAM >
64MB
Video BIOS Shadow To enable / disable Video BIOS Shadow function.
Toggle between On or Off to control the state of
the NumLock key when the system boots. If On,
the numeric keypad is in numeric mode. If off, the
numeric keypad is in cursor control mode.
Rate and Typematic Delay) are irrelevant. Keystroke
repeats at a rate determined by the keyboard con-
troller in your system.
When Enabled, you can select a typematic rate and
typematic delay.
When the typematic rate setting is enabled, you can
select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second.
Choices: 250; 500; 750; 1000. This option sets the
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.
password is required every time the System
boots, or only when you enter setup.
Choices: System; Setup(default)
Select OS2 only if you are running OS/2 operating
system with greater than 64MB of RAM on your
system.
To enable the function will copy Video BIOS to
shadow RAM to improve performance.
58
Advertisement
Table of Contents
