Table of Contents
Advertisement
ACPI Function Select Enabled(default) only if your computer's op-
ACPI Suspend Type Allows you to select the ACPI Suspend type. You
Power Management
Option
HDD Power Down When enabled after the set time of system inactivity,
Suspend Mode When enabled after the set time of system inactivity,
Video Off Option To set Video Off mode of the system.
Video Off Method Determines the manner by which monitor is blanked.
MODEM Use IRQ To set IRQ Modem should use. If users do not have
Soft-Off by PWRBTN To turn off the system instantly or after 4 seconds
Run VGABIOS if S3
Resume
AC Loss Auto Restart To select Restart mode after AC loss.
AMD K8 Cool 'n' Quiet
Control
erating system supports the Advanced Configura-
tion and Power Interface (ACPI) specification.
Currently, Windows 98SE/ME, Windows 2000 and
Windows XP supports ACPI.
can select S3(STR) for Suspending To RAM if your
system supports this mode. Or you can select S1
(POS) for Power On Suspend under ACPI mode.
Choices: S1(POS)(default);S3(STR); S1&S3
To select the type (or degree) of power saving for
Doze, Standby, and Suspend modes.
Choices: User Define:- Time length defined by user;
Min Saving:- Minimum power saving mode;
Max Saving: Maximum power saving mode;
the hard disk drive will be powered down while all
other devices remain active.
the whole system will be suspended.
Choices: Always On; Suspend -> Off
Choices:
Blank Screen:- Blank signal to the Video buffer;
V/H sync+Blank:- Blank signal to Video buffer, with
Vertical and Horizontal ports off;
DPMS Support:- To select video power management
values with Display Power management Signaling;
a modem, please set NA.
by power button.
To enable/disable to run VGABIOS if S3 Resume.
Choices: Auto; Yes; No
Choices: Off; On; Former Status
To disable /Autorun the AMD K8 CPU cool and quiet
control.
65
Chapter 4 BIOS Setup
Advertisement
Table of Contents
