SOLTEK SL-K890-754G Manual page 57

SL-K890-754G
LDT & PCI Bus Control:
To press< Enter > on LDT & PCI Bus Control will reveal the following
item(s).
Upstream LDT Bus
Width
Downstream LDT Bus
Width
LDT Bus Frequency To set LDT Bus Frequency.
PCI1 Master 0 WS
Write
PCI2 Master 0 WS
Write
PCI1 Post Write To enable / disable the support of PCI1 Post Write.
PCI2 Post Write To enable / disable the support of PCI2 Post Write.
PCI Delay Transaction To enable / disable the PCI Delay Transaction
Memory Hole To enabled / disabled (default) the support of
VLink Mode Selection To select VLINK mode.
PCIE Land Width To select PCIE Land width.
System BIOS
Cacheable
Performance Mode To select Performance mode.
To set Upstream LDT BUS Width.
Choices: 8 bit; 16 bit
To set Downstream LDT BUS Width.
Choices: 8 bit; 16 bit
Choices: 200MHz; 400MHz; 600MHz; 800MHz
To enable / disable the support of PCI1 Master 0
Wait State Write.
To enable / disable the support of PCI2 Master 0
Wait State Write.
function.
Memory Hole which is reserved for ISA card.
Choices: Disabled; 15MB-16MB
Choices: Mode0; Mode1; Mode2; Mode3; Mode4
Choices: Auto; 8X; 16X
Selecting Enabled allows caching of the system
BIOS ROM at F0000h-FFFFFh, resulting in better
system performance.
Choices: Normal; Fast; Ultra
60