4-6.7 Pnp / Pci Configuration - SOLTEK SL-K890-754G Manual

4-6.7 PnP / PCI Configuration

PnP/PCI Configuration allows you to modify the system's power saving
functions.
Run the PnP/PCI Configuration as follows:
Choose "PnP/PCI Configuration" from the Main Menu and a screen with
a list of options will appear:
Phoenix - AwardBIOS CMOS Setup Utility
PNP OS Installed
Reset Configuration Data
Resources Controlled by
x IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
** PCI Express relative items **
Maximum Payload Size
: Move Enter: Select
F5: Previous Values
PNP OS Installed Allows you to configure the PNP devices by BIOS
Reset Configuration
Data
Resource Controlled
PnP PCI Configurations
No
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enabled
4096(Byte)
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
or O/S.
Choices: No(by BIOS); Yes(by O/S)
Normally, you leave this Disabled(default). Select
Enabled to reset Extended System Configuration
Data (ESCD), when you exit Setup if you have in-
stalled a new add-on and the system reconfiguration
has caused such a serious conflict that the operat-
ing system cannot boot.
The Plug and Play Award BIOS can automatically
By configure all the boot and Plug and Play compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields will not appear,
as the BIOS automatically assigns them. If you se-
lect Manual, the IRQ Resources item will appear for
your configuration (see below).
67
Chapter 4 BIOS Setup
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults