Control Function 1; Control Function 2; Control Function 3 - GEM 695 Operating Instructions Manual

14.1 Control function 1

In its resting position, the product is closed by spring force.
1. Activate the actuator via control medium connector 2.
ð The product opens.
2. Vent the actuator via control medium connector 2.
ð The product closes.

14.2 Control function 2

In its resting position the product is opened by spring force.
1. Activate the actuator via control medium connector 4.
ð The product closes.
2. Vent the actuator via control medium connector 4.
ð The product opens.

14.3 Control function 3

In its resting position the product has no defined normal posi-
tion.
1. Activate the actuator via control medium connector 2.
ð The product opens.
2. Activate the actuator via control medium connector 4.
ð The product closes.
www.gemu-group.com 31 / 40
14 Operation
GEMÜ 695