Free2Move eSolutions eProWallbox Installation Manual page 17

Before proceeding with the installation, make sure that:
•
The input power is completely switched off and remains in this condition
until installation is complete.
•
As the work area is considered a dangerous zone it has been adequately
cordoned off in order to prevent the access by persons not involved in the
installation operations. The appliance is not installed in conditions of rain,
fog or high humidity.
•
The appliance's packaging is perfectly intact and free from obvious
damage. If the appliance and/or its packaging are damaged, please
request support from the following link:
com/contact-us/
•
The appliance and all its components are completely intact and free of
any obvious defects or faults. If any damage is noted, the installation
procedure must be abandoned immediately, and technical support must
be contacted.
WARNING
The design of the entire electrical system to which the appliance
is to be connected must first be determined by a qualified
professional. The electrical data of the appliance, which should be
referred to in order to correctly gauge the size of the power supply
system, is displayed on the appliance's identification label.
WARNING
Installation should not be carried out with wet hands and no jets of
water should be aimed at the appliance.
www.esolutions.free2move.
17
Inst a llat io n M an ual