Installation; Preparing For Installation - Free2Move eSolutions eProWallbox Installation Manual

3

INSTALLATION

DANGER
Before carrying out any work, switch off the power supply.
DANGER
Failure to observe the instructions in this manual may cause serious
damage to both the product and the installer (in the most serious
cases, injuries may be fatal). Please read this manual carefully before
installing, switching on and using the product. Free2move eSolutions
S.p.A. recommends only using experienced professionals who comply
with current regulations to install the product correctly.
NOTICE
Once the device has been powered up, the display will not turn on
immediately. This can take up to one minute.
3.1

Preparing for Installation

Before choosing and installing the appliance, the installer must consider local
restrictions as set out in the IEC 61851-1 standard. However, it remains the
responsibility of the installer to check that these regulations are still in force, and
above all to verify whether additional local regulations apply and could restrict use
of these devices in the country of use and installation.
DANGER
Installation and start-up of the device should only be carried out by
qualified personnel who are able to identify imminent and potential
hazardous situations and, consequently, act safely.
Installation must meet IEC 60364-7-722 standard requirements.
16
Inst a llat io n M an ual