Table of Contents
Advertisement
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys. An explanation
of the <F> keys follows:
<F1>: "Help" gives options available for each item.
<F9>: Setup BIOS default values.
<F10>: Save and Exit Setup.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide.
Quick Boot Allows you to enable / disable quick boot of your
Delay for Hard Drive
(Sec.)
1st/2nd/3rd Boot
Device
Try Other Boot De-
vices
S.M.A.R.T. for Hard
Disks
Bootup Num-lock Allows you to toggle between On or Off to control
Floppy Drive Swap Disabled (default), Floopy Drive A will not be chnged to
system.
Allows you to adjust the time of detecting hard disk
on board at booting system.
Choices: Disabled; 1~10 sec. in 1 sec. stepping.
Allows you to set floppy or IDE devices already in-
stalled to be the 1st/2nd/3rd boot device.
Choises: Disabled; Device(s) installed
Allows you to enable/disable system to try to boot
with other boot devices.
Choises: Yes; No
Allows you to enable / disable the Self Monitoring
Analysis and Reporting Technology for the hard disk.
Choices: Enabled; Disabled
the state of the NumLock keys when the system
boots. If On, the numeric keypad is in numeric
mode. If off, the numeric keypad is in cursor con-
trol mode.
B, nor B to A. Enabled, Floppy Drive a and B will change
position.
69
Chapter 4 BIOS Setup
Advertisement
Table of Contents
