SOLTEK 85MR3 Manual page 62

(Optional) Redstorm
Overclocking Tech
CPU Ratio
Selection
CPU Linear
Frequency
CPU Clock If CPU Linear Frequency is set Enabled, this item
PCI Clock Auto
Detection
Spread Spec-
trum Selection
CPU Voltage
Control
AGP Voltage
Control
DIMM Voltage
Control
Press <Enter> to start RED STORM OVERCLOCK-
ING TECH. This option gives user an easy way to
overclocking. It will increase CPU external clock
automatically. When CPU external clock increases
to an unacceptably high value, BIOS will restart your
system, then running at an acceptable CPU exter-
nal clock.
If CPU onboard is one with an adjustable or un-
locked CPU ratio, this item allows you user to ad-
just the CPU Ratio.
This item allows you to enable / disable this setting
function.
allows you to set CPU Clock.
Choices: 100MHz ~200MHz in 1MHz stepping.
Allows you to enable / disable this auto detection
function on PCI clock.
If CPU Linear Frequency is disabled, use this item
toenable/disable Spread Spectrum Selection. This
function will reduce the EMI (Electromagnetic
Interference) in your system. If you do not have an
EMI problem, leave this item disabled.
allows you to configure the CPU Voltage. Usually,
to raise CPU voltage will raise the chance of CPU
overclocking and yet risk damage of CPU.
Choices: Auto; 1.100V ~1.850V in 0.025 stepping
allows you to configure the AGP Voltage.
Choices: 1.5V; 1.6V; 1.7V; 1.8V
allows you to configure the DIMM Voltage.
Choices: 2.5V; 2.6V; 2.7V; 2.8V
85
Chapter 4 BIOS Setup