Table of Contents
Advertisement
Installation Manual – Hardware Installation
BBU3806 WCDMA Base Band Unit
5.6 Mounting BBU3806 on Wall
5.6.1 Installation Space Requirements
When a single BBU3806 is installed on the wall, the available space shall be no
smaller than 482.6 mm (width) x 370 mm (height).
When multiple BBU3806 are installed on the wall, the space between
neighboring BBU3806s shall be no smaller than 50 mm. In this case, the
preferable mode is side-by-side installation.
5.6.2 Installation Procedure
When no standard 19-inch cabinet is seated in the site, you may mount BBU3806 on
the wall as follows:
1)
Remove the two hangers mounted to BBU3806 at the factory.
Note:
Two hangers are mounted to both sides of the BBU3806 front, as shown in Figure
5-1.
Another two hangers are delivered with related accessories to support vertical
installation of BBU3806.
2)
Fasten the four hangers onto the BBU3806 with eight M6 pan head screws, as
shown in Figure 5-4.
3)
Place the BBU3806 against the wall, and then mark the wall-mounting positions
of the four outer hangers with a pen.
Note:
You may also mark the wall-mounting positions, as shown in Figure 5-6.
Huawei Technologies Proprietary
5-6
Chapter 5 Installing BBU3806
Advertisement
Table of Contents
