Affixing Labels; Figure C-4 Writing Direction Of The Label; Figure C-5 Affixing A Label To A Signal Cable - Huawei BBU3806 Installation Manual

Installation Manual – Hardware Installation
BBU3806 WCDMA Base Band Unit

Figure C-4 Writing direction of the label

C.2.6 Affixing Labels
After printing or writing the label, remove the labels from the bottom page. Affix them to
signal cables or the ID plates of the power cables.
I. Affixing Label to Signal Cable
1) Decide where to affix the label.
Affix the label 20 mm from the connector on the signal cable. To avoid bending the
cable or affecting other cables, you may affix the label at other positions.
For the vertical cable, affix the label with the text area to the right. For the horizontal
cable, affix the label with the text area downward. Figure C-5 shows how to affix a label
to a vertical signal cable. The method is similar for affixing a label to a horizontal cable
except the cable is 90° clockwise.

Figure C-5 Affixing a label to a signal cable

2) Fold the narrow part of the label to the right, as shown in Figure C-5-a.
Huawei Technologies Proprietary
C-6
Appendix C Engineering Labels for Cables