Installation Manual – Hardware Installation
BBU3806 WCDMA Base Band Unit
Appendix B Making Connector of Communication
B.1 About This Appendix
This appendix describes how to make a connector of the communication cable as
follows:
Making RJ45 Connector
Making SMB-Type Connector
Note:
The method of making BT43 connector is the same with that of making SMB-type
connector.
B.2 Making RJ45 Connector
B.2.1 Parts Required
RJ45 connectors and network cables are required.
B.2.2 Stripping and Cutting
Strip the cables by the specifications in Figure B-1 and Figure B-2.
Cables added with RJ45 connectors include round communication cables and flat
telephone cables, as shown in Figure B-1 and Figure B-2. The stripped length on
either cable is "L+ (2 – 3 mm)". Figure B-4 shows the meaning of "L". "2 – 3 mm" is
the length reserved for wire cutting and flushing.
Cable
Huawei Technologies Proprietary
B-1
Making Connector of Communication Cable
Appendix B