Table of Contents
Advertisement
7 Installing the cabinet on the Wall
7.2 Installing the Wall Mounting Fastening Parts
Hold the drill tight and keep the bit vertical to the wall. To avoid sloping holes, do not shake while drilling.
•
When the cabinet is fully configured (including the batteries), its weight can reach 156 kg. Therefore, consider
•
the weight-bearing capability of the wall when installing the cabinet. The cabinet can be installed only when
the wall is able to support the cabinet.
Ensure that sufficient heat dissipation space (50 mm) is reserved between the rear panel of the cabinet and
•
the wall if the cabinet is mounted on a wall.
Place the marking-off plate on the wall and
m ark
installation holes by the marker pen.
When the cabinet without the battery compartment.
Top
Front
Bottom
When the cabinet with the 20 Ah battery compartment.
Top
Front
Bottom
When the cabinet with the 40 Ah battery compartment.
Unit : mm
Drill holes (with the Ø16 bit ).
11
Top
Front
Bottom
The depth of the hole
should range from 52
mm to 60 mm.
90°
Advertisement
Table of Contents
