Table of Contents
Advertisement
Installation Manual – Hardware Installation
BBU3806 WCDMA Base Band Unit
Figure B-4 Outline of neatly-cut core wires
B.2.3 Wire Insertion and Assembly
I. For 8-Core Flat Telephone Cable
Insert the 8-core flat telephone cable from the end of the RJ45 connector until the
connector butts against the external protection layer of the cable. Insert each core
wire along a trough of the RJ45 connector to the end, as shown in Figure B-5.
II. For Round Communication Cables
Insert round communication cables into the connector in the same way above. The
core wire ends should be flush to make it easy to put them in position.
III. For Shielded Cables and Shielded Connector
Insert core wires of a shielded cable into the shielded RJ45 connector in the same
way above. Make sure that the folded shielding layer contacts the built-in shielding
piece at the tail of the RJ45 connector and butts against point A of the connector. See
Figure B-5.
Huawei Technologies Proprietary
B-3
Making Connector of Communication Cable
Appendix B
Advertisement
Table of Contents
