Installation of the rotary encoder
2.3 Design of the signal plug connector
The signal connection between the motor and the Motor Module is established via a pre-
assembled MOTION-CONNECT DRIVE-CLiQ cable.
2.3
Design of the signal plug connector
M17 signal plug connector with DRIVE-CLiQ
2.4
Connecting to a converter
2.4.1
Connecting to a converter
• Use pre-assembled MOTION-CONNECT cables from SIEMENS.
• Pre-assembled MOTION-CONNECT cables reduce installation time and costs and increase
operational reliability.
12
1
2
3
4
5
6
7
8
9
10
Operating Instructions, 07/2021, A5E50553480A/RS-AB
TX-P
TX-N
-
-
RX-P
RX-N
-
-
24 V
0 V
BA 2331