Beckhoff EL9 Series Documentation page 26

Product overview
Technical data
Technical data
Nominal voltage
Power contact current load
Electrical isolation
Current consumption from E-Bus
Bit width in the process image
Configuration
Power LED
Diagnosis
Electrical connection to mounting rail no
PE contact
Renewed infeed
Connection facility to additional power
contact
Side by side mounting on Bus Termi-
nals with power contact
Side by side mounting on Bus Termi-
nals without power contact
Weight
Permissible ambient temperature
range (during operation)
Permissible ambient temperature
range (during storage)
Permissible relative humidity
Dimensions (W x H x D)
Mounting [} 73]
Vibration/shock resistance
EMC resistance burst/ESD
Protect. class
Installation pos.
Approval
Connection EL9150
Hazard to individuals and devices!
When designing a Bus Terminal block with different potentials on the power contacts (e.g. 230 V AC and 24
V DC), please note that it is mandatory to use potential separation terminals (EL9080)!
Bring the bus system into a safe, powered down state before starting installation, disassembly or wiring of
the Bus Terminals!
Terminal point
Indication No.
1
230 V (120 V ) 2
AC AC
0 V 3
PE 4
5
230 V (120 V ) 6
AC AC
0 V 7
PE 8
26
EL9150
230 V (120 V )
AC AC
max. 10 A
500 V (E-bus/field potential)
-
-
no address or configuration settings
yes
no
no
yes
1
yes
yes
approx. 50 g
0°C ... +55°C
-25°C ... +85°C
95%, no condensation
approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm)
on 35 mm mounting rail conforms to EN 60715
conforms to EN 60068-2-6/EN 60068-2-27
conforms to EN 61000-6-2/EN 61000-6-4
IP 20
variable, see chapter "Mounting of Passive Ter-
minals [} 83]"
CE
cULus [} 86]
CAUTION
Description
not used
Supply input 230 V (120 V
AC
power contact)
0 V for supply input (connected internally with terminal 7 and power contact)
PE (connected internally with terminal 8 and PE power contact)
not used
Supply input 230 V (120 V
AC
power contact)
0 V for supply input (connected internally with terminal 3 and power contact)
PE (connected internally with terminal 4 and PE power contact)
Version: 3.9
EL9160
typ. 90 mA
1 bit (diagnosis)
yes, in process image
variable
), connected internally with terminal 6 and
AC
), (connected internally with terminal 2 and
AC
EL9xxx