Table of Contents
Advertisement
Video operations
Loading the preset still images
This shows how to specify the still image patterns (16 types) and
pattern colors, and load the preset still images into this unit.
1.
From the [SETUP] button, touch <Still Image> in the
<Video> tab.
The Still Image screen appears.
2.
Touch Memory Select <Still Image 1>–<Still Image 8> to
select the loading destination for the still image.
A red border is shown around the selected memory.
3.
Touch Import from <Preset>.
Preset Still Image Select window appears.
4.
Touch the parameters to edit their settings.
Setting
Explanation
Pattern
Selects the pattern color.
Color Theme
Loads the still image.
5.
Touch <Generate>.
The still image is loaded into the unit. "Done. " is shown once the
operation is finished.
6.
Touch <OK> to close the message.
16
Capturing a still Image from program output
Video
Here's how to capture a still image from the program output video.
* When in dual mode, this captures the output video for program 1
(PGM 1).
1.
From the [SETUP] button, touch <Still Image> in the
<Video> tab.
The Still Image screen appears.
2.
Touch Memory Select <Still Image 1>–<Still Image 8> to
select the loading destination for the still image.
A red border is shown around the selected memory.
3.
Touch "Import from <Capture>" at the desired timing.
A confirmation message appears.
* To cancel, touch <Cancel>.
4.
Touch <Execute>.
The capture is executed. "Done. " is shown once the operation is
finished.
5.
Touch <OK> to close the message.
MEMO
¹ If you capture when HDCP (p. 9) is on, the still image that is
created is handled in the same way as HDCP-protected video.
This feature is unavailable if HDCP is disabled.
¹ The capture may take some time to finish.
Advertisement
Table of Contents
