Replacing The Cutting Blade - Power Fist 9095738 Manual

V1.0 20V Cordless Brushless Dry Cut Metal Saw, Tool Only
To charge, accomplish the following.
1. Using your thumb and fingers, depress the
battery release latch and pull the battery pack
away from the tool (Fig. 6-1).
2. Connect the battery to the charger (Fig. 7).
3. Frequently monitor the battery throughout
the charging process, checking its status:
• 1 illuminated indicator light = 0% to 30% charged
• 2 illuminated indicator lights = 30% to 70% charged
• 3 illuminated indicator lights = 70% to 100% charged
4. Once the indicator shows the battery as charged, remove from the
charger.
5. Unplug the charger.
6. Allow the battery to properly cool.
7. Reattach the battery to the tool.

REPLACING THE CUTTING BLADE

1. Loosen and remove the screws for the shield guard (Fig. 8).
2. Push in the spindle lock lever (Fig. 9), while using the supplied hex
wrench to rotate the blade until the spindle lock lever engages and
locks the blade in place (Fig. 10). Once locked, the blade will not rotate.
Visit www.princessauto.com for more information
Fig. 8
Fig. 9
9095738
Fig. 7
Fig. 10
13