Table of Contents
Advertisement
Available languages
Available languages
9095738
20V Cordless Brushless Dry Cut Metal Saw, Tool Only
IDENTIFICATION KEY
A
Pivoting handle
B
Base plate
C
Fence lock lever
D
Removable guard
E
Spindle lock lever
F
Soft handle
G
Saw blade
H
Quick adjust fence
I
Movable clamp
J
Quick lock/release lever
K
Carry handle
L
Switch trigger
M
Battery port
N
Battery pack (not included)
O
Lock pin
OPERATION
Numbered references in parenthesis (#1) refer to the
included Parts List.
Letter references in parenthesis (A) refer to the
included Identification Key.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in
an illustration or image.
1.
Set the appropriate cutting depth for your workpiece by loosening the
hexagonal bolt (Fig. 1-1) and adjusting the hexagonal nut (Fig. 1-2). Once
the desired cutting depth is achieved, tighten the hexagonal bolt.
•
To raise the depth of the cut, rotate the hexagonal nut clockwise.
•
To reduce the depth of the cut, rotate the hexagonal nut
counterclockwise.
10
For technical questions call 1-800-665-8685
V1.0
Fig. 1
Advertisement
Table of Contents
