H3C WX6103 Installation Manual page 75

|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
================================================================================
Enter your choice(0-5):
File control submenu
You can change the application file type and name, and delete an application file in the file control
submenu.
Select 4 in the BootWare main menu to enter the file control submenu.
The following output is displayed on the EWPX1WCMB0:
===============================<File CONTROL>=============================
|Note:the operating device is cfa0
|<1> Display All File(s)
|<2> Set Application File type
|<3> Set Configuration File type
|<4> Delete File
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-4):
The following output is displayed on the EWPX1WCMD0:
=================================<File CONTROL>=================================
|Note:the operating device is cfa0
|<1> Display All File(s)
|<2> Set Application File type
|<3> Delete File
|<0> Exit To Main Menu
==========================================================================
Enter your choice(0-3):
NOTE:
The default configuration file type of the EWPX1WCMB0 is N/A. You cannot change the file type.
BootWare operation submenu
You can back up, restore, and upgrade the BootWare in the BootWare operation submenu.
Select 7 in the BootWare main menu to enter the BootWare operation submenu:
===========================<BootWare Operation Menu>============================
|Note:the operating device is cfa0
|<1> Backup Full BootWare
|<2> Restore Full BootWare
|<3> Update BootWare By Serial
|<4> Update BootWare By Ethernet
|<0> Exit To Main Menu
================================================================================
Enter your choice(0-4):
67
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|