Upgrading the BootWare and application files by using TFTP or FTP through an Ethernet port
•
NOTE:
The BootWare program is upgraded together with the application program. The system automatically
•
upgrades the BootWare program when you upgrade the application program.
Before upgrading the software of your access controller, check the current BootWare version and
•
application program version to make sure that the correct file is used for the upgrade. For the association
between the host application program version and BootWare version, see the hardware and software
compatibility matrix in
BootWare menus
BootWare main menu
Upon access controller power-on or reboot, the console terminal connected with the access controller first
displays the following information:
System start booting...
Then, the following information appears:
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing..............
Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
cfa0 Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu..
NOTE:
The extended boot menu is referred to as BootWare main menu in this document unless otherwise stated.
At the prompt above, press Ctrl+B. The system prompts you to enter the BootWare password:
Please input BootWare password:
Release Notes
.
H3C WCMB BootWare, Version 1.18
: Sep 13 2010
: BCM1125H
: 32KB
: 600MHz
: DDR2 SDRAM
: 1024MB
: 166MHz
: 512KB
: 259MB
: 010
: Ver.F
65
*
*
*