H3C WX6103 Installation Manual page 28

Mounting the access controller chassis
Rack-mounting the access controller
The WX6103 can be installed in an N68 cabinet of H3C or a standard 19-inch cabinet based on your
actual requirement. The procedures for installing the WX6103 in these two types of cabinets are similar.
The following describes how to install the WX6103 in an N68 cabinet.
The N68 cabinet was shipped to your order with the mounting position for the WX6103 made ready and
all the accessories outside the access controller chassis installed, except for the switch interface board
cables. For how to install the N68 cabinet, see the N68 Cabinet Installation and Remodel Introduction.
Figure 14 Mount the access controller in an N68 cabinet
20