H3C WX6103 Installation Manual page 20

Optical Gigabit Ethernet ports
The board provides four optical GE ports, which are combo ports. When these ports are in use, the
corresponding electrical ports (ports 21 through 24) cannot be used.
Table 12 Technical specifications for the optical GE ports
Item
Connector type
Number of interfaces
Interface speed
Supported optical fiber modules
Functions
10 GE interface module
The switch interface board provides a one-port or two-port 10 GE interface module for high-speed data
exchange with switching equipment. For more information about the 10 GE interface module, see 10GE
XFP Interface Module for WX6103 Access Controller Installation Guide.
LEDs on the switch interface board panel
Table 13 Description of LEDs on the switch interface board panel
LED
GE port LED (electrical
combo port LED)
Status
12
Specification
LC
4
1000 Mbps, full duplex
1000BASE-SX SFP/1000BASE-LX SFP
Data exchange
Description