Table of Contents
Advertisement
Enter Setup
Barcode Scanning
Powered by area-imaging technology and Newland patented
accurate decoding. Barcodes rotated at any angle can still be read with ease. When scanning a barcode, simply center the
aiming beam or pattern projected by the EM2037 over the barcode.
Barcode Programming
Scanning the Enter Setup barcode can enable the engine to enter the setup mode. Then you can scan a number of
programming barcodes to configure your engine. To exit the setup mode, scan the Exit Setup barcode.
If the engine has exited the setup mode, only some special programming barcodes, such as the Enter Setup barcode and
Restore All Factory Defaults barcode, can be read.
Enter Setup
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode below to enable or disable the
transmission of programming barcode data (i.e. the characters under programming barcode) to the Host.
Transmit Programming Barcode Data
Exit Setup
**
technology, the EM2037 features fast scanning and
** Exit Setup
** Do Not Transmit Programming Barcode Data
2
Advertisement
Table of Contents
