Servicing The Fuel Filter; Draining The Fuel Tank; Figure 87 - Toro Reelmaster 5010-H Operator's Manual

Figure 87

2. Prime the filter and the lines to the high pressure
pump; refer to Priming the Fuel System (page
63).

Servicing the Fuel Filter

Service Interval: Every 400 hours
1. Tilt the seat open; refer to
50).
2. Remove the floor plate by removing the 4 bolts
securing it to the machine.
3. Clean the area around the fuel filter hose
connections.
Note:
Use a clean cloth to clean hose
connections.
4. Move the clamps that secure the hoses to the
fittings of the fuel filter and remove the hoses
from the fittings.
g031412
Tilting the Seat (page
5. Align a drain pan under the filter and remove the
filter.
6. Install a new filter and connect the hoses.
Note:
Ensure that the filter is orientated as
shown in Figure
7. Slide the hose clamps back into place to secure
the fuel hoses to the filter.
8. Prime the filter and the lines to the high pressure
pump; refer to
63).
9. Start the engine and inspect for leaks around
the filter hose connections.

Draining the Fuel Tank

Service Interval: Every 800 hours Drain and clean
the fuel tank if the fuel system
becomes contaminated.
Before storage Drain and clean the fuel tank if
you store the machine for an extended period.
Fuel-tank capacity: 53 L (14 US gallons)
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Align a drain pan under the fuel tank-drain valve
(Figure 89).
59
88.
Figure 88
Priming the Fuel System (page
49).
g421581