Understanding The Diagnostic Light - Toro Reelmaster 5010-H Operator's Manual

4. Press the right button to change the reel speed value. As the speed setting is changed, the display
continues to show the calculated reel speed based on blade count, mow speed, and HOC, but the new
value is also displayed.
Note:
You may need to increase or decrease the reel speed to compensate for varying turf conditions.
Understanding the
Diagnostic Light
The machine is equipped with a diagnostic light,
which indicates if the electronic controller senses an
electronic malfunction. The diagnostic light is located
on the InfoCenter, above the display screen
59). When the machine is functioning properly and
Figure 57
5 inch (127 mm) Reel Speed Chart
Figure 58
7 inch (178 mm) Reel Speed Chart
the key switch is moved to the O
diagnostic light turns on briefly to indicate the light is
working properly. When a machine advisory message
is displayed, the light illuminates when the message is
present. When a fault message is displayed, the light
blinks until the fault is resolved.
(Figure
40
g420087
g420088
/R position, the
N UN