Operating The Cruise Control - Toro Reelmaster 5010-H Operator's Manual

Figure 50
1. Indicates the maximum
traction speed (pedal stop)
•
This feature allows you to customize the speed
settings for your comfort level, or to customize the
speed settings to fit the application.
Whenever the max traction speed is changed via the
supervisor max speed settings or Virtual Pedal Stop,
the traction pedal is automatically reprogrammed to
use the full pedal stroke between neutral and the
new max speed. This means the operator gains
more precise control of the traction speed at lower
maximum speed settings.
Tips for Using Virtual Pedal Stop
(VPS)
•
Set the max speed temporarily lower for mowing
the cleanup pass on the fairway.
•
Set the max speed temporarily lower for improved
control operating in or near the maintenance shop.
•
Set the max speed temporarily lower for improved
control loading the machine onto a trailer.
Operating the Cruise
Control
Setting the Cruise Control
The cruise-control switch locks in the cruise control to
maintain the desired ground speed. Pressing the rear
of the switch turns the cruise control off, the middle
position of the switch enables the cruise-control
function, and the front of the switch sets the desired
ground speed.
After the cruise control switch is enabled and the
speed is set (Figure 51), use the InfoCenter to adjust
the speed setting of the cruise control
Figure 52).
g322245
2. This speed is locked out
under the protected PIN
menu.
(Figure 46 and
To disengage the cruise control use the following:
•
When in transport range, press the reverse traction
pedal, engage the parking brake, or press the
cruise control switch to the O
•
When in mow range, press the reverse traction
pedal, engage the parking brake, disengage the
PTO, or press the cruise control switch to the O
positon.
Note:
Disengaging cruise control results in the
machine dynamically braking to a stop. If you
would like to disengage cruise control but continue
driving, press the traction pedal for a smooth
transition from cruise control to manual speed
control.
1. Cruise-control switch
Adjusting the Cruise Control
Speed
After the cruise control switch is enabled on the
console (Figure 51), use the InfoCenter to adjust the
speed setting of the cruise control
1. Indicates the cruise control
speed
2. Indicates the maximum
traction speed (pedal stop)
36
positon.
FF
Figure 51
(Figure 52).
Figure 52
3. This speed is locked out
under the protected PIN
menu.
FF
g419946
g321767