Normal Sensing Mode; Wume-Hgf1Um-2 - Panasonic HG-F Series User Manual

5.9 Sensing Output Setting (Teaching)

5.9.1 Normal Sensing Mode

■
Overview
In this mode, control output ON/OFF is controlled for a single threshold.
You can select the teaching method from either one of the following two types.
Set value
2-point teaching
Limit teaching
2-point Teaching
■
Overview
This method is to perform teaching on the reference plane of two sensing objects and to set the
intermediate value of the teaching results as the threshold value.
For setting procedure, refer to
Limit Teaching
■
Overview
This method is to perform teaching on the reference plane of sensing objects and to set the
value obtained from adding the shift value to or subtracting it from the teaching result as the
threshold value. This is a convenient teaching method for minute objects or when there is a
background object.
1.
Press the TEACH key when there is a background object or when there is a sensing object.
5-18
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
Operation
This method is to perform teaching on the reference plane
of two sensing objects and to set the intermediate value
of the teaching results as the threshold value.
This method is to perform teaching on the reference plane
of sensing objects and to set the value obtained from
adding the shift value to or subtracting it from the teaching
result as the threshold value.
"4.1.3 2-point Teaching (Normal Sensing
Reference page
"2-point Teaching"
"Limit Teaching"
Mode)".

WUME-HGF1UM-2