Basic Setup Procedure; Flow Of Operations Up To Setup Completion - Panasonic HG-F Series User Manual

4.1 Basic Setup Procedure

4.1 Basic Setup Procedure

This section explains how to set up the product in a factory default state, using basic workpiece
detection in the background as an application example.

4.1.1 Flow of Operations up to Setup Completion

Described below is the flow of operations up to measurement startup.
1.
Before power ON
Check package contents and confirm that all parts are complete.
2.
Installation
Install the sensor and connect the cables according to the installation and wiring methods.
"3.1 Installation Method"
"3.2 Wiring Connection Diagram"
3.
Power ON
Turn ON the power supply and confirm that the digital display of the sensor is displayed and
laser beams are output from the sensor.
4.
Laser spot check
Check whether the laser spot beam of the sensor is irradiated on the workpiece at the location
to be measured.
4-2
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
WUME-HGF1UM-2