Sensing Output Setting (Teaching) - Panasonic HG-F Series User Manual

5.9 Sensing Output Setting (Teaching)

■
Overview
This setting is used to set the threshold teaching method.
Select the output mode of the control output from the normal sensing mode or window
comparator mode (1-point teaching, 2-point teaching, and 3-point teaching)
The following section describes each teaching method.
■
Setting method
● Hold down the DOWN key for 3 seconds or longer on the setting screen, and the setting
change is suspended and the screen returns to the measurement display.
Setting item
Sensing output setting
WUME-HGF1UM-2
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
Sensing output setting
Normal sensing mode
Window comparator mode

5.9 Sensing Output Setting (Teaching)

Teaching method
2-point
teaching
Limit
teaching
1-point
teaching
2-point
teaching
3-point
teaching
Default value
5-17