Panasonic HG-F Series User Manual page 62

5.9 Sensing Output Setting (Teaching)
5.
Insert the sensing object 3 and press the TEACH key again.
Teaching for the third point will be executed.
6.
The threshold value 1 and threshold value 2 will be set and teaching will be completed. If
the difference between the teaching results for the sensing objects 1 to 3 is equal to or
larger than the shift amount, "good" will be displayed on the digital display. Then the desired
threshold value is displayed and the teaching indicator turns OFF.
If the difference between the teaching results is less than the shift amount or if stable
sensing cannot be performed, "Hard" will be displayed. Check the positional relationship
among the sensing objects 1 to 3 and perform teaching again.
5-26
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
WUME-HGF1UM-2